Your position: Home / Europe / Dual Band Signal Booster / 800/2600MHz Booster

800/2600MHz Dual Band Cell Phone Signal Booster Repeater 70dB Gain+Panel Antenna & Logarithm Antenna Kit

Phonetone booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, parking lots and other small weak signal area. Welcome you all to order.
3 Review(s) Sold:11
    Please select the information you wantX
(49 available)
  • Description
  • Reviews(3)
1)Wide Input Voltage:
Input DC Voltage Range 5-15V
2)  Self-oscillation Elimination:
The system detects self-oscillation, first reduces the link gain, then detects the loop, and finds that the self-oscillation is eliminated, the system returns to normal working state, otherwise, the power is turned off to prevent interference signal.
3)  Inactivity Mode:
When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving.
4) AGC (Automatic Gain Control):
When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal.
5) Automatic Power Shut-down:
When the self-oscillation happens, and the link attenuation value reaches 20dB, the MCU sends out the instruction and shut-down the PA.
6) ALC(Automatic Level Control):
Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don't need to worry about the interference and the trouble caused.

Frequency Range: LTE(Band 20),  LTE(Band 7)
Band 20: Uplink:832 ~ 862MHz  Downlink: 791~ 821MHz
Band 7: Uplink:2500 ~ 2570MHz  Downlink:2620 ~ 2690MHz
Max.Gain: Uplink: ≤65dB   Downlink: ≤70dB
Max. Output power:Uplink:≤20dBm  Downlink:≤10dBm
I /O Port: SMA-Female
Dimensions: 115mm*68mm*16mm
Power Supply: Input AC100~240V 50/60Hz,output DC 5V
LED  Indicator:
Continuous GREEN @normal;
Twinkly GREEN @input signals may be not enough.
Continuous YELLOW @ stronger input signals, AGC is working;
Twinkly YELLOW@ self–oscillation happen ,AGC is working,the attenuation value is more than 12dB .
Continuous RED@ power supply is shut down.

Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down.

1. 1 * 70dB Booster
2. 1 * Power Adapter
3. 1 * Mounting Screw Kit
4. 1 * English User Manual
5. 1 * Indoor Panel Antenna with 20ft Coaxial Cable
6. 1 * Outdoor LPDA Antenna with 50ft Coaxial Cable

1. This booster only works for 800/2600MHz . 0-1 bar outside signal may not be suitable for using it.Before ordering,please check your local signal frequency by calling network operator or checking on some sites.
2. For installation, you are supposed to pay attention to the following points:
1) There is seperate wall between indoor and outdoor antennas to make two antenna signal not interfere with each other.
2) To avoid interference, please make the distance of indoor and outdoor antenna more than 10 meters, let them not pointed at each other.

1. Three Months Free Replacement
2. 3 Years Manufacturer Warranty
3. Fast Handle time & Free Shipping
4. Support Wholesales,More Units More Discount

Before ordering:wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station.
Site to Check Australia Frequency:
Site to Check USA Frequency:
Site to Check Other Countries’Frequency:
After Sale:If any problem with the booster, please contact  the customer service and we will try our best to solve

1. What does a mobile phone signal booster include? How does it work? Can I use the signal booster when the outdoor signal has 0 bar?
(1)A signal booster kit mainly includes a signal amplifier ,an outdoor antenna(with a 10 meters coaxial cable ), and an internal antenna(with a 5 meters coaxial cable) etc.
(2)Outdoor antenna receives the signal from the base station to transmit to the repeater, the signal is boosted around the place via the indoor antenna to improve the call; It is suitable for transmitting the voice and data of mobile phone, tablet PC, or the Internet.
(3)Signal booster can only boost the mobile phone network signal, but does not help to generate any signal. For example, if your outside signal has 0 bar, it can not work or bring you any signal.

2. My outside signal only has 1 bar, the booster can bring me signal?
  Yes, it can. According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information.

3. What do I need to know before ordering a signal booster?
  Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal.

4. I do not know my network frequency? How can I know it?
  Before ordering, you can search the frequency site or call your network operator to get information:
 Other choice: contact the customer service to provide related information to recommend.
  A. Tell us your network operator ,and it is used in which country.
  B. Tell us network current signal type(2g 3g or 4g)
  C. Tell us to use it to transmit voice or data

5. How can we do if we order the wrong frequency booster?
  You can contact the customer service to get the solution.

6. Why is my signal still same after installing the booster kit?
  A. The booster frequency is not suitable for your mobile phone network frequency
   B. The booster or the antenna is broken down

7. Mobile phone has full signal with booster, but can not make call or send message?
 Maybe it is the signal input and signal output interfere with each other. You need make sure:
 There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other.
  Please try to change the direction of outdoor antenna.

8. What square meters signal will the booster cover?
  According to the house construction, material, outside signal, etc., it can boost signal as much as 2000 square meters. More information, you can contact the customer service.

9. About receiving the incomplete parcel?
 Please contact the customer service to solve, do not leave the negative feedback, open return or case request.

10. Why can I get a signal on my mobile phone outside but not inside of house?
  Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. That metal which is used in many construction materials or the metal construction acts as a total barrier for mobile phone signals. In this case, the signal booster can work and play an important role.

11. What is the difference of different outdoor antennas?
  For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna ,the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc.

12. What is the difference of different indoor antennas?
  The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc.

Average rating: 5.0 based on 3 reviews
Share your thoughts with other customers
Write a review