Your position: Home / Europe / Tri-band Signal Booster / 900/1800/2100MHz Booster

2G GSM 3G Band 8 & 1 900/2100MHz 4G LTE Band 7 2600MHz Cell Phone Signal Booster Wireless Cellular Repeater for Family Home Use

AN2704
Phonetone booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, parking lots and other small weak signal area. Welcome you all to order.
Sold:51
Price:
USD
$279.99
    Please select the information you wantX
Quantity:
-
+
(50 available)
  • Description
  • Reviews
Specification:
Frequency Range: band 7, 8 ,band 1
Band 8 : Uplink:885 ~ 915MHz Downlink: 930 ~ 960MHz                       
Band 1 : Uplink:1920 ~ 1980MHz Downlink:2110 ~ 2170MHz                        
Band 7 : Uplink:2500 ~ 2570MHz Downlink:2620 ~ 2690MHz
 
Max Gain: 70dB
Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down.
Power Supply: Input AC100~240V 50/60Hz,output DC 5V 2A
Dimensions: 170mm*90mm*23mm
I /O Port: N-Female


Package:
1 * Tri-band Repeater
1 * AC Adapter
1 * Mounting Screw Kit
1 * English User Manual
1 * 6/8dBi Indoor Panel Antenna with 20 Feet Cable
1 * 9dBi Gain Outdoor Yagi Antenna with 50 Feet Cable

 

Feature:
1)Wide Input Voltage:
Input DC Voltage Range 5-15V
2) Self-oscillation Elimination:
The system detects self-oscillation, first reduces the link gain, then detects the loop, and finds that the self- oscillation is eliminated, the system returns to normal working state, otherwise, the power is turned off to prevent interference signal.
3) Inactivity Mode:
When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving.
4)AGC (Automatic Gain Control):
When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal.
5)Automatic Power Shut-down:
When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA.
6)MGC (Manual Gain Control):
In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band.
7) ALC(Automatic Level Control):
Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don't need to worry about the interference and the trouble caused.

 

 

LED Indicator

Standard

LED Indicator

Continuous GREEN @normal

Twinkly GREEN @input signals may be not enough.

Continuous YELLOW @ stronger input signals, AGC is working

Twinkly YELLOW@ self–oscillation happen ,AGC is workingthe attenuation value is more than 12dB .

Continuous RED@ power supply is shut down.

 
 
Guarantee:
1. Three Months Free Replacement
2. 2 Years Manufacturer Warranty
3. Fast Handle time & Free Shipping
4. Support Wholesales,More Units More Discount
 
 
Note: This booster just can adapt to 2600/900/2100MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station.
Average rating: 5.0
Share your thoughts with other customers
Write a review